Castle EZ Bead High Temp RTV Silicone Gasket Maker

E-Z Bead™ - Hi-Temp Red RTV Silicone Gasket Maker

Sellador, Hace Juntas y es usado en Altas Temperaturas
Température Haute RTV Fabricant Piston Silicone

E-Z Bead™ Red is formulated to be used where temperatures reach as high as 650° F, such as high temperature cam and timing chain covers, cross over manifolds, and exhaust manifolds.

Support Materials

Download Technical
Data Sheet

Request Material
Safety Data
Sheet (MSDS)

(click to enlarge)

8 oz. Aerosol, Part No. C0809

DESCRIPTION: Castle^® E-Z Bead's™ innovative applicator allow easy application of RTV Silicone to any surface, even when applying to overhead or vertical surfaces. Eliminates package waste of product due to poor closure of traditional squeeze tubes or caulking guns that become hard after one use. E-Z Bead™ is dispensed through a pressurized can for a clean, smooth, continuous bead of any size. E-Z Bead's™ RTV silicone makes a permanent, flexible seal for a multitude of uses. Special formulations are designed for special applications:

E-Z Bead™ Red is designed for high temperature gasket applications. It will perform at temperatures ranging from -85º F to over 600º F. Exposure to these higher limits, however, should be for intermittent periods only. E-Z Bead™ Red can be used for high temperature cam and timing chain covers, cross over manifolds, and exhaust manifolds. It can also be used for all regular gasket and sealing applications. E-Z Bead™ Red will effect oxygen sensors.

Do not use in direct contact with gasoline, fuel oil, or acidic or caustic solutions.

DIRECTIONS: Varies by application. Please consult label.

STORAGE: Store below 120º F.
NOTE: Always check to insure ¼" to ½" of E-Z Bead is protruding from opening for proper storage seal.

PACKAGING:
8 oz aerosol cans 12/case
3" Extension tubes are available.

PRODUCT #: C0809