|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
DESCRIPTION: Graffiti Remover is formulated with Alpha Terpineol which is approved under EPA’s SNAP(Significant New Alternative Program), for replacement of ozone depleting chemicals. Graffiti Remover is biodegradable, phosphate free, non caustic, non corrosive and has low toxicity. Flash point of over 200°F, Tag Closed Cup EPA Method (#SW846-1010). Graffiti Remover is produced under patents #5112516 and #5393451 with other U.S. and foreign patents pending. No regulated VOC’s (EPA Testing Method #8240). Because of the aggressive nature of Graffiti Remover, it is recommended that Teflon or Buna S Packaging and washers be used in sprayers and pumps. DIRECTIONS: USE PROTECTIVE WEAR. For small jobs, such as ink on desk, apply to a clean cloth and wipe surface. When graffiti is gone, wipe with a clean wet cloth to stop the cleaning action. For larger jobs apply with a sprayer or brush. Let sit for 1-2 minutes, scrub with brush or aggressive pad (depending on surface). For brick or concrete, use fiber or brass brush. Rinse with water. Repeat if necessary. If left on too long Finger Lakes Graffiti Remover may attack painted surfaces, plastic, and plexiglas. Over spray must be thoroughly washed clean. Test small inconspicuous area of material to be cleaned for colorfastness. Not recommended for certain vinyls. PACKAGING: 12 oz aerosol 12/case cylinder 12/case 1 gallon 4/case 5 gallon pail 15 gallon drum 55 gallon drum STORAGE: Do not store near oxidizing agents. PRODUCT #: FLSC4512, FLSC45390, FLSC45128, FLSC4505, FLSC4515, FLSC4555 |
||||||||||||||||||||||||||
©2006 by Castle Products, Inc. All Rights Reserved. info@castlepackspower.com webmaster@castlepackspower.com |
||||||||||||||||||||||||||
Graffiti Remover
